cajones2
Member
Can I safely run a 1.25" lugged track on my 99 sx? Is 1.25 getting too tall? I'd also like to put some studs in, would I be able to run studs with that deep of a lug?
If it is too tall, could I shave it do 1" and if so, how would that impact the hook up out of the hole?
-Craig
If it is too tall, could I shave it do 1" and if so, how would that impact the hook up out of the hole?
-Craig
ThePunisher
New member
- Joined
- Jan 25, 2005
- Messages
- 24
The track itself shouldn't have any fitment issues. I run a 1.25"ripsaw on my 97 vmax 600sx.
Don't know what will happen with studs though...I stay away from them =)
-Jimmy
Don't know what will happen with studs though...I stay away from them =)
-Jimmy
ExpertXViper
New member
If you want to run studs save yourself the money and just buy a 1in Predator, itll save you money and time from saving it.
cajones2
Member
What is your position on the every 3rd window being closed, or every third being clipped? What is the resoning behind the closed window? I would think those tend to wear more??