cobra 1.60 track

[schmidtty]

wonderering if anyone knows what drivers would work to put arctic cat 141 1.60 cobra track in 2000 mountain max. I think pitch on this track is 3.0 or am I wrong thanks

 

[tomseal6]

If the pitch is 3,

My MTN Apex is 3 pitch and has 7 tooth drivers. they are same diameter as the 8 tooth 2.5 pitch

 

[schmidtty]

drive shaft diameter

will drivers fit on my drive shaft

 

[Tombis]

will drivers fit on my drive shaft

I just put 3" pitch drivers from a 2008 nytro on my 2001 mm700

 

[schmidtty]

3.00 drivers

were these drivers from a nytro mountain and all drivers worked

 

[tomseal6]

If they are extrovert, just make sure your track is fully clipped and will work with those drivers.

 

[Tombis]

were these drivers from a nytro mountain and all drivers worked

Yes 7 tooth drivers from a nytro mountain( they have a larger diameter than the stock 2.52 pitch 8 tooth by 1/4" but the hex on the inside is the same size)

Tom