PhatboyC
New member
Bender Re-Action Suspension Installed - Pics
For anyone wondering what the Bender Re-Action Suspension looks like once installed. Here some pics I took yesterday at the cottage.
This is what it look like before it went in.
Profile view after.
My father on his new 06 Venture in the background.
I think the strong winds with snow gave a hard time to the focus.
The height of the suspension looks perfect to me. Aldo it has 11.7" of travel it is compact and doesn't lift the back to high. Still looks stock to me which is what I wanted. It's supposed to be a copy of Yamaha's Momoshock RA. But the sled sits lower then an Apex. Perfect.
I have only ridden 28km so far but I can tell already that it is comfy. I used to feel any ice rut I would go over at low speed but not anymore. Cliff at Advanced Dyno did a very good job installing it. I asked him to adjust it so the skies don't lift more then 4" when I pinned it. To keep the stock take off speed. He ended up making two hole to shorten the limiter strap.
When the sled is level, the last 4" of the track lifts 1/2" off the ground. When I sit on it you can still slide a peace of paper on that part but that's it. I didn't want to lift the front and my girlfriend will be riding sometimes with me so this setup is perfect.
Highly recommend this upgrade for the SRX!
For anyone wondering what the Bender Re-Action Suspension looks like once installed. Here some pics I took yesterday at the cottage.
This is what it look like before it went in.
Profile view after.
My father on his new 06 Venture in the background.
I think the strong winds with snow gave a hard time to the focus.
The height of the suspension looks perfect to me. Aldo it has 11.7" of travel it is compact and doesn't lift the back to high. Still looks stock to me which is what I wanted. It's supposed to be a copy of Yamaha's Momoshock RA. But the sled sits lower then an Apex. Perfect.
I have only ridden 28km so far but I can tell already that it is comfy. I used to feel any ice rut I would go over at low speed but not anymore. Cliff at Advanced Dyno did a very good job installing it. I asked him to adjust it so the skies don't lift more then 4" when I pinned it. To keep the stock take off speed. He ended up making two hole to shorten the limiter strap.
When the sled is level, the last 4" of the track lifts 1/2" off the ground. When I sit on it you can still slide a peace of paper on that part but that's it. I didn't want to lift the front and my girlfriend will be riding sometimes with me so this setup is perfect.
Highly recommend this upgrade for the SRX!
Last edited:
Yamidude59
New member
looks great, is this suspension still made by bender? what do they cost new?
PhatboyC
New member
Very nice!! I like that!!
Yamidude59
New member
looks like some work to get everything swapped from the no action suspension to that one.