Difference between Hauck racing Stage II trail Porting and Stage III race porting??

X

xviperx7

New member
Joined
Oct 26, 2008
Messages
150
Age
31
Location
Wiscasset
i was wondering the Difference between Hauck racing Stage II trail Porting and Stage III race porting?? any help would be appreciated also peoples experience with these? thanks :nos: :2strokes: :letitsnow
 

Hauck ports his own stuff well, and his customers stuff not so well. You will have a better job done at another builder. Send it to Iantomasi. They'll do it right.
 
i have had a lot of success ( race & trail ) with both bender & justin fuller @ full power performance.
bender 716 941 5840
full power 716 699 6299

bob
 
valin said:
Hauck ports his own stuff well, and his customers stuff not so well. You will have a better job done at another builder. Send it to Iantomasi. They'll do it right.
Click to expand...


X2, They do it right the first time. Great costumer service and awesome builders!!!!

Iantomasi
(905) 263-4868
 
98700 said:
X2, They do it right the first time. Great costumer service and awesome builders!!!!

Iantomasi
(905) 263-4868
Click to expand...

nothing like helping family huh?? lol im just playin.those boys do an awesome job..but they speciallize in ski-doo's(mach's) mostly i believe. not saying they cant make any other muscle sled run..
but how about don phizor he knows these motors in and out.
& also if i may add i had a bender ported viper & that thing was awesome as well..cant go worng with those three..
 
srxbully said:
nothing like helping family huh?? lol im just playin.those boys do an awesome job..but they speciallize in ski-doo's(mach's) mostly i believe. not saying they cant make any other muscle sled run..
but how about don phizor he knows these motors in and out.
& also if i may add i had a bender ported viper & that thing was awesome as well..cant go worng with those three..
Click to expand...


They specialize in everything. Flav personally has an F-7 and an srx. All of our cousins out there run Iantomasi ported srx's. But I will admit they can seriously port a mach, Thanks to ski-doo for leaving soooo much meat in there.
 
I have Haucks stage 2 and it is practiclly no different then stock. Worst money i have ever spent going to have bender do it over.
 
Had Hauck go through my clutch's once. When I picked it up they bragged to me how much better it was than stock. When I left I thought AWSOME!! From there I went on to my weekend ride up in the Hayward area. I was broken harted, I had less top end than stock. You could see on the clutch where the belt wasn't even shifting out. Big Waste of money!!!
 
All I have had is bad luck with Haucks...with snomobiles and atvs. I took my YFZ there for a new exhaust system and they tried to give me the pipe they were running on there test quad and still charge me full price! Living 20 miles from them and them being my local dealer i get to see exactly what they are made of. Nothing but a rip off all the way around. Pat Hauck will never see another dollar from me.
 
i had hauck do a 700 big bore on a '98 sx600. it was supposed to make 130ish. i took and got it dynoed and it was 118. he said it was my twin pipes i was using because he recommended aaens at the time. i should have pulled the jugs and checked the piston size but never did. maybe it was the Bender pipes, dunno.
 
Hauck

Are they really that bad?? Does anybody on here ever used haucks stuff and was happy with it. I have had hauck do all my 01 srx work and nobody has beaten me yet at a drag race. Please pm me just wondering.
 
i have a hauck 866 big block vmax4 with the howlers down pipes inside the sled, its my snow dragger and is still undefeated, has not run for 2 years doing a bunch of up dates as bender screwed up the outer crank bearings did not aling the dowell pins and squezzed the cases 2 geather. now we know tim does,ent do work like that but his want 2 be mechnics did.
 
BOB, TAKING THAT 700 SX THAT WERE RUNNING ON TAR TO JIM,S IN AFEW WEEKS. CAN FINALLY SEE WHERE THOSE PIPES MAKE PEAK. I CLUTCHED THEM FOR 9000. SLED GONE 10.18 @ 124. THIS MOTOR WAS PORTED BY FULLER WHEN HE WAS AT BENDERS. 3:16 (yammie tony)
 
You must log in or register to reply here.


Back
Top