2000 srx secondary set up

[dave carpenter]

i have a 2000 srx with 1.25 ripsaw with 96 studs and i was woundering on secondary set up stock setting is 80 degrees and i have 1 washer for belt adjustment ,the reason i ask is i was out riding and i found bult was easy to slip but it was like around 5 degress out and the snow was sticky just woundering on set up

thanks dave

 

[modsrx]

Let Uss Know Your Primary Set Up......turk Will Help U

 

[98700]

I'm sooo lost reading your post. What are you asking? Tell me your Primary, And what helix? What spring?

 

[modsrx]

I Think The Belt Slip In Secondary Clutch .......

 

[98700]

So you think the belt is slipping in the secondary? So you're wondering what to do?

 

[dave carpenter]

sorry guys its a stock 2000 srx 700 and i added 1.25 track with studs and went for ride and belt slipped but i bacause it was warm out ,but was wondering if stock clutch set up is ok for track and studs

thanks dave

 

[mopar1rules]

stock setup is red spring @ 80 deg......you could try the green spring @ 60-70 deg if you want. i've never seen 96 studs make the belt slip tho.

 

[dave carpenter]

its probubly bacause it was 5 deg outside and snow was sticky i think

dave

 

[Maddogs700srx]

Is your track to tight?

 

[dave carpenter]

well pulled secondary apart and had no shims for belt so i will get some to adjust belt and ill check track tension to i think the belt was a bit low

dave