snowfoxsx
New member
like it says, i want to install a polaris IQ rear skid into my 97 700sx. would the dimensions be the same as the edge or pro x measurments or different? its out of an 09 and brand new, and at the price i payed i cannot go wrong!!
the sleds got the power with a bender big bore kit, ported, polished, case ported, 36mm carbs, reed spacers and carbon fiber reeds, bender triples, 2 layer gasket mod, now it needs the ride!!
nothing like a oldtimer beating up on some of the new big boys out on the lake!!
the sleds got the power with a bender big bore kit, ported, polished, case ported, 36mm carbs, reed spacers and carbon fiber reeds, bender triples, 2 layer gasket mod, now it needs the ride!!
nothing like a oldtimer beating up on some of the new big boys out on the lake!!
harness racer
New member
I installed a polaris skid in my 600 but not the one you are reffering too, nevertheless it rides very very good , and i did not loose a mph. I did have to fabricate some plates to accomadate the skid , the yamaha tunnell is just a bit wider than the skid i used . i am very pleased with it.
snowfoxsx
New member
thanks