CDI box- any difference between 600 and 700cc?

M

MikeSr

New member
Joined
Jan 3, 2009
Messages
214
Age
71
Location
Racine, Wisconsin
My 2000 SRX, which if you have been reading these posts you already know - has no spark. It is looking like the CDI box.

The part number for a 2000 SRX 700cc is 8DN-85540-10-00 - which is what I might need.

Is this the same part number as the 600cc for the year 2000? Are they the same box?
 
the part number for the 600 srx is 8DF-85540-00-00. they didnt make an srx 600 in 2000 only 98 and 99. this is why the part number would be different. i would recommened getting another 700 cdi. also the 600 box is more money then the 700 box. hope this helps.
 
that explains it

That explains why I didn't see a 600 model listed in the yamaha parts list.

For those who don't have a source for this -
portyamaha.com has a feature where you can see the part numbers, and prices.
 
you need one from a 2000 srx by the way.01 & 02 are the same but 00 is different..as 98 & 99 are the same. they wont plug in..just a heads up.
 
Did you check your pick-up coil? I had this problem with my 2000. Also, if your looking for a CDI I have one for sale. Sent you a PM!
 
srx 600 wasnt made in 2000 olny 98 and 99 ....olny difference between the two is the 600 cdi has more timming ( 2 degrees more timming ) i belive
 
I know i am beating a dead horse. But, have you checked the wiring harness that plugs into the CDI? 2yrs ago I had the wiring harness issue and fixed it. But occasionally it will still freeze up w/no spark. I had 7 wires rubbed through on the CDI wiring harnesses... if not gone altogether. Take a good look. If not that, I would still tape, wrap in plastic convoluted tube, and I put some clear plastic label (that is used on dirtbikes) on the inside of the sheet metal above the footwell. Good luck.
 
You must log in or register to reply here.


Back
Top