Secondary clutch question

[BLUE DEVIL 700]

i've never had a Yamaha Secondary apart before,Im wondering how you get the desired amount of degree twist? im looking to set my Silver spring at 70*.Like to now how you figure this out.

 

[TopGunnSrx]

You'll need the spring in the #1 hole on the clutch itself and #6 hole in the helix, there is no #4

 

[mopar1rules]

You'll need the spring in the #1 hole on the clutch itself and #6 hole in the helix, there is no #4

that's correct.

 

[YAMMIEGOD3:16]

DEVIL, SET YOUR SPRING IN SHEAVE LOCATION 1. THAN SET YOUR SPRING IN CAM LOCATION 6 (which is location below 3 ). TURN CLOCKWISE UNTIL HOLES LINE UP. DROP ON. PRETTY SIMPLE. GETS ALITTLE TUFFER WHAN YA ADD TWIST. 3:16 (yammie tony)

 

[mopar1rules]

tony, how did you do at those local radar runs?

 

[BLUE DEVIL 700]

DEVIL, SET YOUR SPRING IN SHEAVE LOCATION 1. THAN SET YOUR SPRING IN CAM LOCATION 6 (which is location below 3 ). TURN CLOCKWISE UNTIL HOLES LINE UP. DROP ON. PRETTY SIMPLE. GETS ALITTLE TUFFER WHAN YA ADD TWIST. 3:16 (yammie tony)

thanks tony,pretty straight forward once you know..lol