YamahaSXR700
Member
I Got A Sxr 700 And I Jus Want To Know If I Need To Bleed The Antifreeze When I Put Some In The Motor, If Yes Where Is The Bleed Screw
mopar1rules
Active member
if you are just adding a little to the bottle, no need to bleed system. if you are adding because of draining the coolant system or something like that, then yes i would bleed the system. the bleeder screw is located under the seat, on top of the rear heat exchanger.
YamahaSXR700
Member
so the rear radiator in the back where the snow flap?
daman
New member
what mopar said plus yes need to remove the seat then bumper cover,
you'll see it then,then the one on the thermo stat housing.
you'll see it then,then the one on the thermo stat housing.
Ix Josh9056 xI
New member
if it is empty you dont have to bleed it all you have to do is take the hose off the head hold it higher then the rear heat exchanger and keep pouring antifreeze in it will bleed itself and start to come out the top of the head.