What size studs ??

[C River Yamaha]

Have a 03 viper with the stock track thinkin about 144 down the center what lenth studs should i get so i dont have clearence problems?? Thanks

 

[C River Yamaha]

Somebody runs studs???

 

[maxdlx]

if memeory is right in the .92 track I ran woodies 1.187 studs. Contact Rich at www.richmotorsports.com he sells mack studs and the work great, he'll know what to sell you for it. Maxdlx

 

[alswagg]

I am running Accorn Racing Carbide studs. Cost was $1.40 each with aluminum backer. 1" push through, 5/16 I bought from John Master's Excellant to deal with. I run 144 but both center and outside or rails. You will need to have heat exchanger protectors. Al

 

[maxdlx]

A 1" stud on a .92 track isn't much good is it? Maxdlx

 

[alswagg]

You can get a 1.125 stud for the same price i believe. I am just using the 1" stud on my 7/8" lug track. Once measured the stude is 1/4" above the height of the track. Not sure why but the that is the measurment. Al

 

[Sno-Xr]

I have 1.175 woody megabites in my 1 1/4 lug track and they clear by 1/4" . Dont know why, I just know they do.
When I installed them I pretty much bottomed out the nut, which sucked the head flush with the inside of the track.

 

[richierich]

03 viper had 1" lug.If you need some studs i have them with backer for $1.10 each.thanks rich

920-582-4823
sales@richmotorsports.com