Classic SRX
New member
How 'bout:
wrong belly pan for '76 (no openings or rubber boots for '76)
wrong frame/bulkhead for '76 (shouldn't extend through the belly pan)
wrong skis
wrong skid/rear wheels
case reed triple crankcase
tunnel extension
not sure if there is a heat exchanger under the seat
What else did I miss?
wrong belly pan for '76 (no openings or rubber boots for '76)
wrong frame/bulkhead for '76 (shouldn't extend through the belly pan)
wrong skis
wrong skid/rear wheels
case reed triple crankcase
tunnel extension
not sure if there is a heat exchanger under the seat
What else did I miss?
Last edited:
bogus1
New member
76 Srx
Looks Like A 77 With The Tunnel Streched And Some Kind Of Three Cyclinder Motor
Looks Like A 77 With The Tunnel Streched And Some Kind Of Three Cyclinder Motor
bogus1
New member
76 Srx
I Will Buy The Seat From You
I Will Buy The Seat From You
yamaha one
New member
please tell us that is not a 8f2 bulkhead!!!
the avitar picture is an aluminium bulk head 76 all original this one is steel I will update some pics tommorow
I think you are missing the hood . . . lol
Last edited:
Missing primary spring and clutch cover.
Belly pan okClassic SRX said:
Frame through tunnel ok Steel not Aluminium
Home made skis
Missing sway bar rear wheel
700 viper not 440
tunnel extension homemade
Heat exchanger under seat and both running boards
thanks for reply
A 700 Viper engine in that. You are going to pull wheelies at will.
bogus1
New member
how fast in 660 ft
i dont see anything wrong with that. looks good and have fun on it.....
i could use the SRX pipes in the backgeound....
i could use the SRX pipes in the backgeound....
exhaust pipe layout should be interesting!
i cvered it myself $30.00bogus1 said:
the original 76 did 92 mph in 600 all day longbogus1 said:
I am trying to sell all the 440 parts engine complete recoil clutch carbs pipes cdi fuel pump air box tool kit $250 totalbig-kid said:
Classic SRX
New member
I'm interested in the works if it's actually for a '76 SRX.
A.
A.
Sorry no its all 79 . I have a local guy thats keeps saying he'll take it all but hasn't materialized yet if he doesnt step up soon I would give you the pipes you cover shipping.Any chance you have a right side rubber spindle boot cover
Video Clip
changed photo to the top with short video clip
http://www.youtube.com/watch?v=Us9odtjA0ag&feature=channel_page
changed photo to the top with short video clip
http://www.youtube.com/watch?v=Us9odtjA0ag&feature=channel_page
Last edited: