I should be putting everything back together this week work schedule allowing.
I hate to loose some performance by setting it up for 87 octane but I would rather play it on the safe side since most of where I ride only has 87 octane available and it is a trek to get to another gas station.
The SRX heads are 22cc 98-99 models that were cut down.
I can use 1or2or3 layers of the viper head gasket to get the deisred compression ratio and this i'm sure will affect the squish as well.
Thanks everyone!
I hate to loose some performance by setting it up for 87 octane but I would rather play it on the safe side since most of where I ride only has 87 octane available and it is a trek to get to another gas station.
The SRX heads are 22cc 98-99 models that were cut down.
I can use 1or2or3 layers of the viper head gasket to get the deisred compression ratio and this i'm sure will affect the squish as well.
Thanks everyone!
something around 120-125 will be good for low octane ....make sure u have good squish specs....