PV Cables

[stein700sx]

Will the rubber sheathing on the PV cables in the below pic cause any problems? It is where they connect into the curved steel pipe leading to the PV's

 

[daman]

i don't understaind what problems you talking about??

 

[..SNAKEBIT..]

I wish my cables looked that good!

 

[YAMAHIZAL700]

I think his question is about the mag side cable missing the rubber sleeve that goes over it just before the bend. And Id say its probably ok to run it that way.

 

[stein700sx]

The rubber is not crimped on the metal sleeve on 2 and 3 . Just wondering if that will be a problem or is it purely cosmetic.

 

[daman]

should be fine as long as the inner case in intact.

 

[PhatboyC]

Sorry for the side track question. But this black head is a 700 with PV's with 110hp right? Comes in the SX, SX-R same one as in the 700 Venture? The only red head are the 600 100hp meaning no red 700 without pv's?

 

[daman]

Sorry for the side track question. But this black head is a 700 with PV's with 110hp right? Comes in the SX, SX-R same one as in the 700 Venture? The only red head are the 600 100hp meaning no red 700 without pv's?

that is a viper motor(120hp)only in vipers,no red head tripple(vamx,sx,venture,etc)600(98-100hpish) or 700cc(112hp) ever had power valves.

 

[PhatboyC]

Oh yes the Viper. I forgot, that makes sense. How about the 600 SRX? 600cc Blue head with pv's with 118hp. Correct?

 

[RIVERRUNNER]

I heard they are around 118-120hp