Clutch weight's

I have used 5.5 grams with a 51/43 and it worked.I was thinking about changing gears to.Like a 24 upper and 40 lower.Would like to try a 52/44(I think this is the one Turk recomends to use.)
 
otis700 said:
Next week I plan on trying 5.5 grams in both holes with a 40 tooth bottom gear and the 48-40 advantage edge helix and green spring.

Im right at 8500 with this setup with 4.5 grams in both holes so hoping to be close with the 5.5 grams weights and lower gearing.

Mark
Click to expand...
I'M looking to try a set of 8bu 00 with 5.0 of tip weight.Have you ever tryed them before.
 
bluemonster1 said:
mod...you gotta spend more time with the baby and less on sled...lollllll
Click to expand...


i know i know but they sleep and sleep and sleep again my gf told me to go ride so i do ......she's sweet ;)!
 
I ran 68.5 garsms with stock gearing it's in the total combination.Primary spring,rollers,type of weights,helix,sec spring.Everyone of them has a factor in how much weight you can run.I have ran 5.5 grams in both holes in 8dn 00's which are heavier then the 20's to start with.It's all in the set up.Even a stock skid with full trtavel effects how much weight you can pull.If you have the limiter strap all the way out there is a lot more drag vs way sucked up.I could go on and on.That's why Turk was saying he needed more question's answered.I could boldt my exact clutches on another identical sled and it probaly couldn't pull the rpm's unlees everything is set up right.
 
You must log in or register to reply here.


Back
Top