does it light on start up to make a bulb test ...
daman
New member
Yes it should,3 flashes on start up then off.
not the code light but the detonation light should flash too ???
thnx just see it in the owner manual
daman
New member
Yes DCS should flash upon start up. 3 times then off,bulb check.
ok try to solved my friend problem light doesnt flash on start up
daman
New member
check bulb,voltage @ socket...
otis700
Member
dcs
Two of us with 02 srx's on this forum had dcs related issues and it was because the wire from the dcs sensor was broken about a foot from the sensor right at the connector. Its a very thin wire there. Take a look there as well.
Good luck.
Mark
Two of us with 02 srx's on this forum had dcs related issues and it was because the wire from the dcs sensor was broken about a foot from the sensor right at the connector. Its a very thin wire there. Take a look there as well.
Good luck.
Mark