staggs65
Moderator
I know i've seen on here some guys running them, I'm looking at one now with the x package shocks, just wondering if anyone who's already done this changeover could give me some measurements for the mounting holes, or direct me to where I can get em, also how do you like it?
Robnoxious
New member
i mounted a sc10 3 in my 03 viperand this is what i went by. dimensions from the bottom side of the tunnel, front hole is 4 5/8" and the rear hole is 5 3/4" . the suspension mounting points are 25 3/16" (center to center) apart. the center of the front hole is 8 1/4" from the center of the driver. hope this helps. i also had to make spring changes and replaced the shock with a fox 8 clicker remote resivoir shock. does not handle like its on rails anymore but over all ride is 100 times better. no more sore lower back.
staggs65
Moderator
thanks for the info