List of aftermarket helix angles

[**sj**]

okay O whats that?

 

[helix]

What's a Hauck T

 

[**sj**]

here are some bender helix angles, provided by YAMMIEGOD3:16....

2070 -47/43
64T-1 -43/39
64T-2 -45/41
9760 - 49/45
9770 - 49/37
9770-TP - 51/43
9770-S - 51/39
9860 -51/45
9870 -53/43
9770-TPP 47/43
9970C=53/49

any idea of a bender 9820?

 

[98+01srx]

I thought a hauck G was a 49 straight

 

[mopar1rules]

Hartman YRX3 helix=50/42...provided by 98700.

thanks nik.

 

[cheapsx]

maxx perf:

6MS7= 48/42
MSR8= 52/40 (should say 7MSR8, cause it was out of a '98 srx 700 and that was the part# for a maxx SRX 700 clutch kit...the 6MSR8 is for the 600 SRX...don't know that angle.)

I have an 8MS5 any idea what that may be?

 

[mopar1rules]

I have an 8MS5 any idea what that may be?

press the bushing out. maxx engraved the helix angles, on the bushing bore wall. put some green loctite on the outside of the bushing when you press it back in.

 

[Concept Carbon]

7SRX8C any one know what this helix is

 

[mopar1rules]

7SRX8C any one know what this helix is

concept, press the bushing out, and the angle will be engraved inside the bore of the helix. i'm going to take a guess that its a 52/40 or 52/42.

 

[Concept Carbon]

I found it online havent purchased it yet.

 

[mopar1rules]

I found it online havent purchased it yet.

oh.....

 

[mopar1rules]

a new angle for the list...

maxx perf 7MSRO = 50/46??

 

[mopar1rules]

here's another bender one.....

9960 = 51/47

 

[hereismylife]

thanks guys for posting the specs on the helix.....

 

[MIViper]

Bender 9870c

Does anyone know what a 9870c has for angles?

 

[mopar1rules]

Does anyone know what a 9870c has for angles?

can you post a side view of the angle ramp? i can ballpark the angle for you.

 

[mopar1rules]

anybody know what a rpc3 helix is? its a cat helix for a cat secondary, but rpc was big into putting cat secondaries on earlier yamaha sleds. trying to find out the angle. its looking like a 58 to 62 deg start, but does anyone know the angle for sure? thanks.

 

[mopar1rules]

another one....bender helix stamped "RX-1 '03" is a 51/45, as measured.

 

[mopar1rules]

more bender helixs:

2002B is a 47/43

02VTP is suppose to be a 49/45, but measures 49/46.

 

[mopar1rules]

here's a new one:

Maxx perf 7PT7= 44/34