Triple pipes w/reverse?

YooperMike

YooperMike

New member
Joined
Feb 23, 2006
Messages
530
Location
McMillan, MI
Are there any triple pipes out there that will fit with the reverse being left in place on a 2000 MM? I have been looking at the SLP's and have contacted some people about used, but really don't want to lose the reverse, it's nice for backing off the trailer and into the garage. Thanks.
 
I have SLP's and I really, really, really wish I had reverse. I like the power more, so converting back is not an option (I never had reverse but thought more than once of having dealer install it!!!!!), but back in the day of these machines it's too bad Yamaha or SLP didn't reverse engineer a reverse that would fit with their pipes!!!!!!

Kinda seems like that ship has sailed though.... :( :( :( :( :( :(

MJB
 
Last edited:
Anybody on here run Power Inc. Stage II Hi-Altitude Modblaster Torque Pipes??? It says on their website that they are designed for peak torque at lower RPM's, which is what I want. But would they work at low altitude, say 800-1800 ft? And, of course, do they work with reverse?
 
Not sure if they are the same pipes but I ran the power inc. end dumps on my 700 and wow did they ever have lots of bottom end. Top end gain was still impressive as well but the throttle response was amazing. And they do fit with reverse with no troubles at all.

Here's a pic

IMG_0520.jpg
 
I had SLPs on my 01 MM700. It was the three into one design and I had reverse. No problems. It was a little tight but they went in and I had no melting problems etc with the pipes.
 
You must log in or register to reply here.


Back
Top