super1c
Super Moderator
I noticed that i could not tighten the trottle in the position i wanted it in. It apears the trottle assembly is cracked so the screw wont tighten down against the bars. Do i need to replace the whole thing as it dosent come apart. And will i need to take the grip off to get throttle off meaning ill have to replace the grips also. Thanks again guys! Chris
yes but use air blower and push grip off
yam429
Member
throttle
My brother in-law had the same thing happen to his viper and you do not have to take the grip off. Just unscrew the screws and separate the throttle assembly into two.
My brother in-law had the same thing happen to his viper and you do not have to take the grip off. Just unscrew the screws and separate the throttle assembly into two.
I took the bars off and soak the grips in hot water and then a little help from a plastic windshield tool and the grips were off.
yes you have take it off so you cane put the new one