SX_SLAYER
New member
very nice sled, did you make that seat from scratch??? it almost looks like a REV seat....
SX_SLAYER said:
http://www.brplynx.com/sleds/sport.html
The seat is from a 08 Lynx RE 600 so it does look like a REV seat since it´s BRP made. SamueLJackson modified it a bit though.
Ike
here is a short clip where you can see the FMI meter in working.
Ike
low slung
Active member
Nice mods,makes me want to hold on to my 04 warrior to save down the road for a future project.By the way i could of bought one of these sleds new in the fall of 1997, but stayed away because someone said they overheated.Little did i know that the coolers on the running boards are the best way to go to cool your snowmobiles engine. 
Last edited:
SamuelJackson
Member
If it overheates, i have rearcooler from 700 model to put in place. 600 twin dont have rear cooler only metal tube on cooler place.
low slung
Active member
Smart move,you can never have too much cooling unless its 50C below.
SamuelJackson
Member
Just read from old dynotech article that this 600 twin engine has so smart cdi unit that when u are driving wot long time it retards ignition timing to avoid detonation... nice.....
test run completed
test run completed
Last edited:
xrrider
Member
saaaweeeet!!!!!
Yeah, that is awesome!
sleddineinar
VIP Member
Snow.... I am soooo jealous! That sled looks awesome by the way! Nice Job!
SamuelJackson
Member
New foot rest. Rider forward desing .....heh
Last edited:
SamuelJackson
Member
I`ve went to ikes place and drove first little longer run with xtc and I noticed some points that need improvement.
Engine is reving too high, way over 8000 rpm. And it needs more cooling, longer flap or rear cooler.
Front suspension is too stiff, just like a snowcross sled. I need to shim shocks again or try softer spring.
At sodankylä were ike liwes is plenty of snow and nice trails to test sled. Heres a pic.
Engine is reving too high, way over 8000 rpm. And it needs more cooling, longer flap or rear cooler.
Front suspension is too stiff, just like a snowcross sled. I need to shim shocks again or try softer spring.
At sodankylä were ike liwes is plenty of snow and nice trails to test sled. Heres a pic.
Last edited:
bravo-guy
New member
Is that A 144" track on the Mountain Lite? How does the little motor handle the longer track? Oh and BTW the way, the V-Max is looking pretty sweet 
SamuelJackson
Member
No its 155" track with 2 " lugs.
Engine pulls fine 60mph on hard surface, and gearing is very short.
Engine pulls fine 60mph on hard surface, and gearing is very short.
sleddineinar
VIP Member
SNOW!!! You lucky dogs!! That XTC looks real nice!
Bigger gauges installed (´01)
Ike
SamuelJackson
Member
Project is now completed
We have ridden XTC over 300 kms now and everything works ok.
Heres my wife with XTC last week, she likes sled very much because its easy to ride.
We have ridden XTC over 300 kms now and everything works ok.
Heres my wife with XTC last week, she likes sled very much because its easy to ride.
SamuelJackson
Member
Heres couple pics more. I`ve moved seat 4" to front, now seat is at right place. We rode xtc about 1000kms last winter and everything worked well.
SamuelJackson
Member
installed new track 128x15x1.75
SamuelJackson
Member
Our club annual season ending uphill dragrace is at 30th day. I Made little tuning to xtc and installed my watercross sled cylinder head to xtc engine. Squish is now 0.055" and comression 170psi. I am running 100 oct fuel. I wonder if sled is any faster...
Last edited: