I pulled my skid out to change my sliders and now my track seems to be way to tight and if I loosen it alittle it will ratchet in powder. Now the question is how tight does the track have to be. If its set not to ratchet it takes a bit of force to spin and it comes to a quick stop when you let off of the throttle while it is on a stand.
staggs65
Moderator
might get a little better after the hyfax gets broken in? 
kirk700 srx
Member
04sxviper said:
I used to have that problem with my viper , I just got used to hearing it skip Wasn't very smart on my behalf. I also had an issue with bearing in chaincase on the drive sprocket I thought it was the track skipping but in fact it was the bearing had disinergrated and I pulled drive sprocket right up through the chasis It pays to check and double check