Hey guys what is the best non abrasive sticker gunk out that you use, I need to clean the tunnel on my viper and some on the hood....
Thanks
Nick
Thanks
Nick
Sticker residue out......What to use...?
- Thread starter Nicko
- Start date
Well I re-research and found some answers, Googone Goof off (done it before and never again) WD40 is what I will try, Peanut butter (not sure I want my sled stinking like PB and 2 stroke oil....
Mods feel free to erase this one....
Nick
Mods feel free to erase this one....
Nick
daman
New member
mineral spirits....works like a charm.
WD 40 is not doing it for me....Are you sure about the Mineral Spirits Daman...?
daman
New member
yes,,that's all i use for sticker residue like old trail permits or registration stickers,yep works good,Mineral Spirits is a weak cleaner will not hurt paint.Nicko said:
Ok, I will try it...email me your address so I can send you the paint shop bill, incase I screw it up....LOL....Thanks Daman....
Found some odorless Mineral Spirits and did one side, looks great, Thanks.
daman
New member
No problem......: )Nicko said:
daman
New member
See..i wouldnt steer you wrong...Nicko said:
flatblack97
Member
shoot, i've even used carb cleaner!
daman
New member
On paint???? i would not,thats a strong cleaner!flatblack97 said:
Tom in Arizona
New member
You might try a penetration oil, I use "Kroil". Also I found that if I apply hot air from a plastic welder it will loosen real old stickers so that they peel off easily. Then use the Kroil to dislove the adhesive.
dooman333
New member
What wrong with usin' GooGone? That's what I used and it worked great. Seemed to be pretty gentle. Damages the finish?
When I took my old regisration stickers off, I just took some duct tape and dabbed the residue, took it off with just a few dabs
Product called Sticker Off.
daman said:
Yeah, I made the mistake of trying carb cleaner on a windshield. It destroyed the windshield. Actually melted the plastic.
OnDaTrail
New member
I also just used goo-gone when I removed my rubber running boards. There was a lot of adhesive to remove and it worked great.
hereismylife
Active member
go to the auto parts store and get bumber staicker remover. It comes in a little spray can. Works good and not so destruction as other products are.