Hey I have off today and I was thinking about making my own 3 piece sled dolly. I was wondering if any of you guys build there own? I figured I would just make them on out wood and throw some decent size casters on the bottom with some rubber on top or even carpet. ANy ideas or thoughts?
OnDaTrail
New member
I did that once and then I found that my local Harbor Freight store sells the perfect size little 4 wheel dollies and just bought 3 of them.
Tractor supply has them for like 9 bucks each.
cosco got those sleds dollies for almost nothing 30$ for 3 strong one ...
TSC is expensive, went there looking for casters and wow I got them form where I work (Fastenal) for 20 I plaid like 1.20 a piece for 3" swivels
sleddineinar
VIP Member
I made some once. Although it certainly is fun making something yourself, I think it would have cheaper if I would have bought them from Harbor Freight or Mills Fleet Farm.
Anyway, I built the one for the track out of 12" piece of 1/2 plywood and the ones for the skis were 8 or 9" 1/2 with 2 strips of wood the length of the piece so there was a groove down the middle for the carbides and I put one locking caster on each of the ski carts. I used 1 1/2" casters.
Anyway, I built the one for the track out of 12" piece of 1/2 plywood and the ones for the skis were 8 or 9" 1/2 with 2 strips of wood the length of the piece so there was a groove down the middle for the carbides and I put one locking caster on each of the ski carts. I used 1 1/2" casters.
Last edited:
Coles_55 said:
These are the ones I saw at my local TSC but they were 8.99 at the local store.
http://www.tractorsupply.com/tools/...-3-wheel-dolly-caster---6-in-diameter-3591678
