120" track

[kirk700 srx]

Will a 120" track fit on a 121" srx? Any mods needed? Is there enough adjustment on track tensioner bolts to fit 120" ? I am looking at the Camoplast 1.75 ripsaw.

 

[Mysledblows]

If I'm not mistaken the 120" track is 2.86 pitch and your srx was 2.52 from the factory. So unless you swap the drivers its not going to be right.

 

[kirk700 srx]

If I'm not mistaken the 120" track is 2.86 pitch and your srx was 2.52 from the factory. So unless you swap the drivers its not going to be right.

Yeah I figured that , I already swapped my 9 Tooth for 8 tooth , But I am still at 2.52 pitch .Shag changing them again!