Hello, I have a 2002 Viper, completely stock other than different track. But anyways after my trip to Michigan last year I noticed the two bolts were gone on my front motor mounts. I have replaced the bolts, but want to ensure that my clutches are aligned and that the motor is still in there straight. I am fairly mechanically inclined and like to fix and do things myself. How do i go about doing it? I have found out center to center should be from 267mm to 269 mm. Any help is greatly appreciated.
Thanks
Thanks
Where you at in MN? If close I've got a sled pro tool you could borrow.
West of the twin cities about 35 miles. You are a few hours away. Thanks for the offer.
Buy or build a clutch alignment tool, In the tech section I think there is a write up on how to make one.