"whose ready for the snow"

amatosrx

amatosrx

VIP Life Member
Joined
Mar 21, 2006
Messages
1,405
Location
byron center mi
my monster is ready for the trails all cleaned up and ready. just working on the rest of the fleet. who else is ready?
 

Attachments

  • 100_2099 (2).jpg
    100_2099 (2).jpg
    173.1 KB · Views: 32
I'm getting there........

I'm getting closer. Pulled the skid, checked everything over, took out stock track(w/ 11,000 km's on it),replaced with ripsaw,and put skid back in. I still have to clean the carbs, clean and adjust pv's, take off the manifold and weld it up, and change the hood.........I think that's all I have to do, but I'm sure I'll find something else...............
 

Attachments

  • sledwork1.jpg
    sledwork1.jpg
    38.8 KB · Views: 4
  • sledwork2.jpg
    sledwork2.jpg
    38.2 KB · Views: 4
  • sledwork3.jpg
    sledwork3.jpg
    45.1 KB · Views: 7
Last edited:
kirk700 srx said:
Can I get a Blueprint of that bumper please I hate plastic!
Click to expand...
it is 4 pieces machined then welded and polished perfect. i do not have a blueprint but can help with some basic demensions. pm me for more details
 

Attachments

  • 100_0703_(2).jpg
    100_0703_(2).jpg
    14.7 KB · Views: 129
  • 100_0554_(2).jpg
    100_0554_(2).jpg
    22.1 KB · Views: 129
just got my skid in last night. new track in as well. now just those pesky little adjustments and im ready.
 
SRX's are ready, waiting for snow. The Viper still waiting for some parts, They should be in by end of the week.
 
Wow that sled is wicked nice. Deff can tell hard work was put into her.

I still have to reg&insure and also install my studs. Got about a month to play with still
 
Well last year I got a new track, PV's, cables, gearcase bearings, drive shaft and jackshaft bearings and new Bender mono skid last year. So hopefully all I have to do is wash it and start it. ;)!
 
Last edited:
I still haven't got mine out of storage yet and i have a big list of to dos: repaint hood, pull engine and clean belly, check harness, put in sc10 3, long travel front, put on 06 vector seat (lots of modding to make this work, we'll see), do bethevipers footboard mod, new track, of course clean powervalves and carbs, and it's snowing out right now!!!!
good thing i'm laid off right now, i'm gonna need the time. lol
 
I got mine almost ready to go... waiting on getting some power valves.. then adjusting them... need to get a gasket kit for the pv's and im good to go..



whats this bethevipers footboard mod? I tried doing a search but didnt find anything about it... curious to know what its about and so on
 
Last edited:
Running Board Mod...
http://www.totallyamaha.net/forums/showthread.php?t=56878

Both of mine are sitting in the shop with the hoods up and pipes torn off... Viper is getting ported along with SRX pipes, clean power valves and carbs... SRX got a new 1.5" track and the suspension beefed up, cleaning power valves and carbs...

Added a Trailing Arm decal from an 01 SRX to the Viper, I think it looks better than the plain silver powder coat... oooh I cant wait for snow!!
Picture230.jpg
 
Had snow on the ground here in northern lower michigan this morning around 9 am with snow shower throughout the day. Still have not busted out the sleds but once deer season gets out of the way it game on :letitsnow
 
You must log in or register to reply here.


Back
Top