alwaysforyamaha
New member
does anyone have the head torque specs and pattern for a 2004 viper?
head torque pattern for viper
- Thread starter alwaysforyamaha
- Start date
super1c
Super Moderator
specs
This will be a little crude but will work. My scanners not working.
...18..............15......................3...............6..................9...............12...
.14.....mag..........13...............2.....center.......1...........7.........pto........8..
....16..............17.....................5................4..................11............10...
First tighten bolts to 1.3 M/kg or 9.4 ft/lb second retighten to 28 M/kg or 20 ft/lb. Hope this helps! Super
This will be a little crude but will work. My scanners not working.
...18..............15......................3...............6..................9...............12...
.14.....mag..........13...............2.....center.......1...........7.........pto........8..
....16..............17.....................5................4..................11............10...
First tighten bolts to 1.3 M/kg or 9.4 ft/lb second retighten to 28 M/kg or 20 ft/lb. Hope this helps! Super
Last edited:
staggs65
Moderator
now thats creative
ryanryan
New member
staggs65 said:
WOW.....I just realized what his post meant! I am a little slow at night!!!
super1c
Super Moderator
Told you guys it was crude, but it gets the info across. You just have to use your imagination. I didnt think it was 2 bad for a quick B.S. bolt pattern LOL!!!!!!!!!!!!!
alwaysforyamaha
New member
Thanks guys. I appreciate it