JERSEYJOE
Member
OK I took the Viper clutch apart, The weights have grooves out near the tip so I need to replace them. Should I just go with the stock 8EK-00 or something elsre? Sled is stock but I am going to use the 50 /40 helix with green spring at 70 degrees.
Also if I used the stock weight shouls I change the rivet weights to some other setting?
Also if I used the stock weight shouls I change the rivet weights to some other setting?
Mac
Member
Joe I have brand new stock weights. You can have them.
JERSEYJOE
Member
clutch weights
Hey Mac Lets Meet For Lunch On Monday In Somerville. Alphonso's ????
Hey Mac Lets Meet For Lunch On Monday In Somerville. Alphonso's ????
mopar1rules
Active member
why 50/40 helix w/8EK weights? i don't think you'll get the weights heavy enough and w/a green spring @ 70. you probably have to change the primary spring then, to get the rpms down, but only testing will tell for sure.
boy MAC, you're a generous dude.
anything i can have for free from you, as long as you're handing out X-Mas presents.....LOL.
boy MAC, you're a generous dude.
anything i can have for free from you, as long as you're handing out X-Mas presents.....LOL.
Mac
Member
Sorry Mopar - Joe and I are Friends, practically neighbors, and best of all we ride together in NY and Quebec. Joe didn't know I had the weights since I purchased my viper new in 2003. I installed CPR pipes with Zero miles on the sled and never ran the stock weights. I have a lot of stuff a should sell on ebay and never make the time.