Do Rx1 Front Shocks Bolt Right On To A Srx?

[Yamanator]

I was told that the RX1 front shocks are a direct bolt on to the SRX's front end for long traveling it. Has anyone done this yet? anyone have any pictures of the change's? I am going to try and do mine over the holiday and just want to know what to expect and what to look for. Anything special I need to do to do this? I was told to just bolt them on and reallign the ski's for toe in. Thanks for any insight in advance. This site is still the best....

 

[staggs65]

you probably meant this but you want 0-15mm toe-out not toe in, toe in will cause darting, dont know about the shocks

 

[Yamanator]

you probably meant this but you want 0-15mm toe-out not toe in, toe in will cause darting, dont know about the shocks

you are right, that is what I meant.

 

[musselman]

RX-1 shocks are 17.5 inches long, I would think that would be too long since viper shocks are 17" and stock SRX shocks are 13.75". RX-1 mountain shocks might work though, they are 15.5" long.