1995vmax500le
Member
hey i had my rear viper skid completely disassembled and now i have it back together and in the sled but i have a question about the transfer rods. there are to holes at the back and the manual says it mounts in the farthest back hole on the rail. questing is are the 2 holes on the rail for different settings and can i move it to the front hole????
bluemonster1
LIFE MEMBER ONLY ONCE!!!
rear holes for long travel and front holes for short travel.I think I got that right.Others chime in.
bluewho
Active member
The long rods will not work in the front holes unless you modify them.Or put a set of short ones in.Not shure on vipers but the early srxs 98..99 had long rods and then changed to short ones front holes for better transfer and ski lift IMO