T.S.U.Filmz
Member
ok i have a 144 SRX with heal clicker kit and I need a good place to start i am turning a 2in paddle track on 8 tooth Extroverts. i forget gearing off had but I will check tomorrow. anyone know a good place and helix to start with?
Last edited:
kirk700 srx
Member
We need more info!! What heel klicker? Weight of rider? Where is most of your riding going to be done? What altitude? Stock clutches? Stock Gearing? How did the sled run before 2" Paddle? Does your wife look good in a bikini?? LOL sorry Pump Gas? Any mods done to the motor? Fill us in!
T.S.U.Filmz
Member
I ride in Michigan Do a lot of off trail rideing I am about 150 155 LBS with all my gear on. As for gearing I will have to look again. I had a 1.5 121 track on the sled last year with stock clutching as far as I know. the motor is bone stock no mods but. bender cold air kit. I also try to keep fresh 93 octane in it
I'm not married yet but as for the bikini it looks better on the floor
I'm not married yet but as for the bikini it looks better on the floor
Last edited:
TopGunnSrx
New member
I believe he's got the original 40-10 clickers as well, do you still have that roller secondary on there Jeff?
Run an apex/rx1 helix at 60 wrap with a green. run red hc primary spring. 4 grams heel & 4 in tip to start is a great starting point.
T.S.U.Filmz
Member
I'm not using the roller would it be ideal?
Last edited:
T.S.U.Filmz
Member
can i run a 52/42 helix? i have one i know the RX1 helix is close
Also anyone have a green spring laying around
Also anyone have a green spring laying around
T.S.U.Filmz
Member
hay turk can i run this? ^^^^^^^^^^^^^^^^^^^^