Anyone have any luck finding the clutch side drive axle bearings from a bearing supplier. Seems difficult to cross-referance. NSK UB205 is close but appears to have a radiused outer race. ***205NR is close as well but has a snap ring on the outer race.
Drive Axle Bearings SRX 700
- Thread starter jaydaniels
- Start date
9801srx
Member
ntn ub205 is the one. it has a straight outer race. the ***205nr is also the same, you just have to remove the snap ring.
I can't seem to find any other than at a dealer.
kirk700 srx
Member
We get them here at kinicor or national bearing
john7459
New member
yep just replaced mine, purchased at barrie royal and they had it in stock, 9.95 I think (could have been 19.95?). I had to remove the snap ring on the bearing.
kirk700 srx said:
Which ones are you getting. The ones with the snap-ring or the NTN UB205?
I believe the ones with the snap-ring are ***205NR.
jaydaniels said:
Just noticed I'm seeing a bunch of *** where I type the bearing number. Its actually A-S-S205NR. Guess its was considered coarse language!!lol. No dashes.
Yamasquaw
Member
- Joined
- Jan 8, 2005
- Messages
- 235
Heres a link to a great deal on all 4 bearings, seals,o-rings, bought a kit for viper and it cost around $80. A local bike shop orders through Gamma sales. Each kit is either jackshaft or driveshaft. http://www.gammasales.com/2010Snowbook/2010SNOWCATPDFS/Drive_Axle.pdf
Last edited:
kirk700 srx
Member
jaydaniels said:
Yeah UB 205 is the ones I get from national bearing (kinicor)comes with allen head set screws
Stephfg
New member
I use Timken or Fafnir collar lock for that and the jackshaft. I think it's about $24. this is the part number for the drive shaft: rae25rr . fyi, the one for the jackshaft is rae25rrb (rounded outer race). Make sure you get metric ones... the other appears to fit, but it's a little too big and comes loose (learned by accident). With the collar lock, you don't have to worry about the set screws letting go. I ordered mine from the local Canadian Bearings store, but do a search online for other dealers.
A couple of bucks
VIP Member
I have a single stage Simplicity tractor mounted snowblower that has the same ones.