My sleds are a pair of 2004 Yamaha Viper ER's...The GUIDE wheel assembly, part # 8EK-47550-00-00 needs a new bearing.. The wheel is molded around the bearing.... The guide wheel is 91.93 plus tax EACH... Looking at the 1998 SRX microfische,,, it looks like the SAME GUIDE WHEEL ASSEMBLY,,, the part # is 8CR-47550-00-00 and the price is 20.12 EACH plus tax.... The 20.12 wheel has a replaceable bearing and the 90.00 wheel does NOT... the 90.00 wheel has little GUSSETS or SPOKES (if you will) and the 20.00 wheel LOOKS LIKE it will work JUST FINE>>>>>>> Can some PROACTION GURU please tell me if the 20.00 wheels will work JUST FINE????? They seem to work on an SRX just fine...... Thanks... Gary Oles nosboy
rx1jim
New member
The outside diameter of the different wheels used on Yamaha sleds have been the same for many, many years. The less expensive wheels with the replaceable bearing will work. The width of the bearings may be slightly different but the wheel outside diameters and the inside diameter of the bearings will be the same.
richierich
New member
Gary,
U talking about the big wheels on the top part of the skid?
U talking about the big wheels on the top part of the skid?
Yes!!!tomseal6 said:
Cam/ Viper adict
New member
some wheels have replacable bearings and some dont, I went to the replacable bearing wheels as mine was non replacable. The 20.00 wheel will work but get a good wheel with replacable bearings.
I cant paste the link due to the new rules so I pm'd ya a hell of a deal.