rail tips, anti ratchets

[ottawaair]

saw the post yesterday about rail tips hitting the drivers with an edge skid, wondering if I will have same problem with the pro action skid, also are the anit stab wheels a must with 8 tooth anti ratchets & pro action skid located in stock location?? Just trying to save time figuring it out if somebody already knows.

 

[pipdviper]

I didnt use the anti stabs with mine. I have the 8 tooth drivers on mine. I used them on the Viper skid and with the M10. I did however have to cut the teeth down on the drivers for clearence to the rails.

 

[maxdlx]

I wouldn't run 8 toths on any sled with out anti stab wheels. But then agaain I run them on all of my sleds

 

[grapeape]

You do not have to run anti stab wheel kits, but if you see track slap marks on the bottom of your rail tips it would be a good idea to use the anto stab wheels. If your rail tips contact the extrovert drivers, a sander or dremel can easily remove the offending plastic quickly while the skid is installed. M-10 skids will rub the most from what I have seen.