ottawaair
New member
saw the post yesterday about rail tips hitting the drivers with an edge skid, wondering if I will have same problem with the pro action skid, also are the anit stab wheels a must with 8 tooth anti ratchets & pro action skid located in stock location?? Just trying to save time figuring it out if somebody already knows.
pipdviper
Member
I didnt use the anti stabs with mine. I have the 8 tooth drivers on mine. I used them on the Viper skid and with the M10. I did however have to cut the teeth down on the drivers for clearence to the rails.
I wouldn't run 8 toths on any sled with out anti stab wheels. But then agaain I run them on all of my sleds
grapeape
New member
You do not have to run anti stab wheel kits, but if you see track slap marks on the bottom of your rail tips it would be a good idea to use the anto stab wheels. If your rail tips contact the extrovert drivers, a sander or dremel can easily remove the offending plastic quickly while the skid is installed. M-10 skids will rub the most from what I have seen.