KITTY KILLER
New member
Does Anyone Know What Angle The Hauck Helix Is On The Srx's
And What Stud Length I Can Go Up To. Cannot Remember If It
Is 1.075 Or 1.175.
---also How Many Sled Lengths Does This Helix Or Any Other
Helix Might Give Me.
---setting Up An Old 98 With No Miles!!! Good Find!!!
Thanks For Your Help Guys
And What Stud Length I Can Go Up To. Cannot Remember If It
Is 1.075 Or 1.175.
---also How Many Sled Lengths Does This Helix Or Any Other
Helix Might Give Me.
---setting Up An Old 98 With No Miles!!! Good Find!!!
Thanks For Your Help Guys
You might want to give a part # on the helix so someone can help you out
on1_wheel
New member
as for stud length you can run up to 1.25 without changing sprockets, however if running the stock track i would recommend the 1.075 length. I am running 156 1.080 studs in the stock track and that looks close enough for my taste to the front heat exchanger. Also, I'm new here but i think tunnel and front heat exchanger protectors were std on 2000 and up SRX's, so check your 98 for them cuz you'll need em!!
KITTY KILLER
New member
Hey Thanks, Wasn't Sure.... Getting Them Today......not To Far From Me
I'm In Cheboygan...hit Your Area Quite Often..
Thanks
I'm In Cheboygan...hit Your Area Quite Often..
Thanks