oddfire
New member
How long of a riser can I run with out needing longer cables? Also, if I need new cables, do you have any ideas?
Thank you
Thank you
yamaha4evr
New member
mostsleds can put a 2" riser on their sleds without extending cables...some have been able to fit a 3" riser all depends how you reroute your cables....i personally have a 6" riser block and pivot adaptor so close to about 8" total...i bought the powermadd riser block pivot adaptor and the power madd extension throttle cables and it works great!! money well spent.
Yamerhammer
New member
You could put the powermadd pivot 3.25 riser on. I put it on my srx700 with no problems. The cables had more slack than my 2inch riser because the pivot kit throws the bars forward.
ssian
New member
You Can put a 2" block and 2" pivot riser in your sled. I have after doing this on my srx, sxr and vmax
I put a Rox 3.5" Pivot Riser on my SRX and my stock cables were plenty long enough.
super1c
Super Moderator
But if he's putting these on a 94 vmax he will be short. I put a 2" on my 96 xt and im tight!!!