bluemonster1
LIFE MEMBER ONLY ONCE!!!
For my SRX with a 1 inch Predator track I want to put on 144 studs.Some say 1.075 and others say 1.175 studs.I want to go with megabites with single and double alum backers.What is the recommended size here without harming exchanger. Original owner had studs on the stock track and I have had exchanger in front chewed and the tunnel.Very hesitant to use studs again,but for good traction and safety on icy areas I think it is a must.I imagine the track would have to be tightened up real good to.Your comments on studs would be appreciated..thanks.
on1_wheel
New member
I'm running 1.080 with no problem so far...keeping the track slightly on the tight side, but can still spin it by hand if needed
hey blue your looking for a green leakage too lollllllllllllllllllll.....i put 1.075 and they hook real good
bluemonster1
LIFE MEMBER ONLY ONCE!!!
ok 1.075 seems to be the size.Now which studs..megabites or SS Signature series(which are a little less in cost)
richierich
New member
I would also use 1.075" in a woody.Heres some prices with shipping to canada
144 megabites,backers=$307
144 signature series,backers=$270
144 extreme max,backers=$220
144 megabites,backers=$307
144 signature series,backers=$270
144 extreme max,backers=$220
drfbuster
New member
- Joined
- Oct 27, 2003
- Messages
- 26
1.075 megabites.. These studs r extremely durable...drf
staggs65
Moderator
x2 on the megabites, more durable than the ss
00SRXWHERRY
New member
Haven't been able to test it out yet but I went W/ a 1 in hacksaw W/ 1.175 gold diggers. Hopefully no green
I did the same,will do some testing tomorrow night! Hopefully no green!00SRXWHERRY said:
please let us know on the 1.175's
I was thinking more like 1.125 or 1.150
I was thinking more like 1.125 or 1.150
tomseal6 said:
From what I've read and my experience, unless you're running a track with a full length 1" lug (i.e. the same height all the way across including/especially the window area), 1.075 is the limit unless you want to run the track too tight or worry about contact.
IMO - Keep the Pretator and go with 144 1.075" Woodys.