primary and secondary spring settings for Viper?

[drfbuster]

Merry Christmas everyone! I need the spring settings for the primary and secondary springs for an 02 Viper. These springs are off of an 03 Viper but i believe they are the same. Thanks! drf

 

[mopar1rules]

stock primary spring is y/w/y--45/128kg--2.5kg/mm rate

stock secondary spring is red @ 70 deg (hole 6 helix and 1 clutch), using a 47deg straight helix (#8bv71).

 

[drfbuster]

Thanks mopar. one more question. does the 70 degrees refer to twist of the helix before bolting on the primary alsi how much twist for the secondary?drf

 

[yamakazie]

There is no twist in the primary. It's a compression spring only. the 70 deg refers to the secondary spring twist when you turn the helix clockwise to the studs.

 

[staggs65]

on secondary add the sheave hole number to the helix hole number x10=degrees wrap

 

[ardviper]

What will happen if you change the degrees of twist on the secondary spring???

 

[Ride.Race.Live]

dont want to hyjack but i got a question regarding secondary springs as well...

how do you read the "tention" on a set up?