Where does this go??

stein700sx

stein700sx

VIP Member
Joined
Feb 12, 2005
Messages
1,999
Location
Southern Manitoba Canada
OK. So after removing the skid, jackshaft, seat, chaincase and clutches on my 02 Viper ER I have this 10mm headed bolt left. I have looked everywhere I can not figure out where it came from. There is no indication of loctite on it so my thots are that it holds a plastic part.HELP!
 

Attachments

  • IMG_0824 (Medium).JPG
    IMG_0824 (Medium).JPG
    53.5 KB · Views: 4
have any friends come over? I do that to the guys all the time, throw a couple spare bolts at them.
 
xt700 said:
have any friends come over? I do that to the guys all the time, throw a couple spare bolts at them.
Click to expand...

Umm, Have you been down in my garage? :die:

I use a magnet tray when it take things apart. When everything was put back together this 1.5" bolt with a 10mm hex head was left in it. I have one more bolt very similiar and its for the aircleaner. The long smoth shank makes me think it bolts a thick piece on. :o|
 
that is a stumper. i've got 90% of my sled apart on a work table so i went out to check and i dont have one bolt that length of that size, mines an srx so i'd say it must go to something that isn't the same between the two sleds, or something on the skid since my proaction is gone
 
staggs65 said:
that is a stumper. i've got 90% of my sled apart on a work table so i went out to check and i dont have one bolt that length of that size, mines an srx so i'd say it must go to something that isn't the same between the two sleds, or something on the skid since my proaction is gone
Click to expand...

I was thinking skid too, but the shoulder on the bolt is pretty long to be holding anything through the rail... and i cant think of anything on the other parts that were taken apart that has a bolt like that... maybe something that bolts to the chaincase cover?
 
You must log in or register to reply here.


Back
Top