MN98VMAX
New member
WOW! What a difference! I love the track hooking up, that stock track sucks! The ski's ride so much nicer than the stock ones too... It's like a whole new sled! Fun stuff! If you haven't done this stuff to your sled, just do it!
I did make a mistake and let my wife ride mine yesterday, now I had to order another set of Rox risers for her 500! LOL!
Mike
I did make a mistake and let my wife ride mine yesterday, now I had to order another set of Rox risers for her 500! LOL!
Mike
What track and skis you went to....?
Be carefull with those risers, I broke my steering stud because of a 2 inch riser....Do a search and reinforced it if you can...
Nick
Be carefull with those risers, I broke my steering stud because of a 2 inch riser....Do a search and reinforced it if you can...

Nick
MN98VMAX
New member
I did the Camoplast Ripsaw 1.25". The ski's are Kimpex, not sure what model...
I did a search on the riser and reinforcement, and found a couple things, but nothing that really went over the fix? Do you have a link to that? Or any advice?
Thanks!
Mike
I did a search on the riser and reinforcement, and found a couple things, but nothing that really went over the fix? Do you have a link to that? Or any advice?
Thanks!
Mike
After mine snaped I inserted a solid pipe on the steering pipe and welded, Its solid and worked for 3 season now.....
I went to a steel yard in Minneapolis and got the right size....
I just heard of a few other ones that broke it, don't want to scare you but I know ride without thinking it could snaped any time....Of course hanging on them and jumping is when they brake
Nick
I went to a steel yard in Minneapolis and got the right size....
I just heard of a few other ones that broke it, don't want to scare you but I know ride without thinking it could snaped any time....Of course hanging on them and jumping is when they brake
Nick
sleddineinar
VIP Member
I broke mine too, we just did what nick said he did, put a pipe (pounded down) inside the shaft and welded it back together. A friend of mine in Ely has a welding shop so he had the right stock just sitting there. I have a 2" riser.