the tree man
New member
I had the weights out of my primary(700 srx w/8DN20 & 4.5 both holes)and 2 are exactly the same weight but 1 is .3 grams shy.Is it a big deal to run this way?Thanks.
no1chevyboy
New member
i would try to make them equal just because of balance and the way they put force on sheeve through rollers could cock and wear bushing more pressure on two rollers just my 2 cents
livewire_101proof
Member
dont mean to but in but is there any reason for people to do this. my brother just got a cat 440 sno pro that was the same way, i put them all the same thinking someone didnt know what they were doing but sounds like there are others doing this too.
daman
New member
rivets do very from place to place and manufacturing process i bring a pocket scale to my dealer and have em dump all the rivets on the counter then i go through and get the ones closes,they should be the same but .3 is minuet i wouldn't worry about that.
Concept Carbon
New member
Onr of my Heelclicker with out weights are out 0.6grams. Turk told me not to worry too much about it.