KITTY KILLER
New member
Help! Cannot Find My Notes: Need Torque Specs On Upper And
Lower Gear Nut And Bolt. Srx 98-02 Chain Case Gears
Thanks
Lower Gear Nut And Bolt. Srx 98-02 Chain Case Gears
Thanks
daman
New member
Top Nut-43 ft.lb
Bottom gear-35 ft.lb(apply loc tight)
Bottom gear-35 ft.lb(apply loc tight)
KITTY KILLER
New member
Wow.....thanks And Yep I Did At Least Remember The L-t On The
Bottom....thanks Again...
Bottom....thanks Again...
ryanryan
New member
daman said:Top Nut-43 ft.lb
Bottom gear-35 ft.lb(apply loc tight)
How important is this??!!!!!! I didn't put any Loc-tite on, and just tightened the bolts to roughly what they were when I took them off....a bit tighter then snug!
KITTY KILLER
New member
I'm A Bit Beyond Crazy About Spec's Etc.,,,, However, Someone Might
Correct Me But... You Do Not Want To Have Any Loss Of Chain Lube Or
Have It Walk Out From Harmonics Etc.
Correct Me But... You Do Not Want To Have Any Loss Of Chain Lube Or
Have It Walk Out From Harmonics Etc.
daman
New member
I would use it,it could play hell if it backs out...