Just seeing how many members RIGHT NOW has pulled through power valves?
i can fix them with a fast turn around time for you .....needaSRX said:mine are close need 3 in the very near future
For this new Viper owner, can you explain what you mean by a "pulled through PV"?98700 said:Just seeing how many members RIGHT NOW has pulled through power valves?
ok i got to say it what do you do with a snowmobile in alanta georgia ??? you got wheels in place of the skis ??? just kidding ....i repair pull thru valves here is a pic of some i have fixed ...and a picture of a pull thru .contact me and i can fix your old ones for 20 dollars each instead of buying new at 100 bucks each ...just cause yours dont look exactly like this dont mean yours aint started to pull thru ......remove valves and take a q tip and clean cable slot good and get a bright light and look inside groove and see if cable has started to enbed itself in the valve ....srt842 said:For this new Viper owner, can you explain what you mean by a "pulled through PV"?
RIVERRUNNER said:I hate to admit this.....but I've got one!!!!!!!!!!!!! Last sat I was running down the river and I would only see 7800-8100 rpm....opened up my valves and boom. Now I need one. I was seeing 102 on the dream-o-meter with a blown valve!!!
Yeah, I'm starting to get a lot of the rhetoric. I'm from Michigan, I live in Atlanta, but I have property in Michigan and that's where I ride. I'll change my info to say MI.YA*AM*A*HEAD said:ok i got to say it what do you do with a snowmobile in alanta georgia ??? you got wheels in place of the skis ??? just kidding ....i repair pull thru valves here is a pic of some i have fixed ...and a picture of a pull thru .contact me and i can fix your old ones for 20 dollars each instead of buying new at 100 bucks each ...just cause yours dont look exactly like this dont mean yours aint started to pull thru ......remove valves and take a q tip and clean cable slot good and get a bright light and look inside groove and see if cable has started to enbed itself in the valve ....
Thanks for the explanation. Good Pic!!RIVERRUNNER said:If you take your valves out of the jugs where the cable goes in the valve, the cable wears threw. So the valve has a hole where the valve attaches to the cable.