Best ice stud setup

[edgeracer1]

Trying to see what guys are running for drag racing studs. all picks, all chizzles, or a mix there going in speed tracks

 

[valin]

Run chisels for drags.....long chisels.

 

[farmboy4240]

im runnin 1.080 stud boy chisels.

 

[edgeracer1]

im planning on running woodys 1.075 chisels but i was told by a few people that you should mix with picks

 

[Floader]

Roetin Thrusters for drags, picks for speed runs. Use as few as you can get away with, every stud you add is weight and drag.

 

[YAMMIEGOD3:16]

ICE PICKS ARE A THING OF THE PAST. CHISELS ALL THE WAY, AND WOODYS TO BOOT. 3:16 (yammie tony)

 

[edgeracer1]

Well looks like we are going with chisels

 

[needaSRX]

yeah I'm going to buy chisels also but the t-nut style, 192 1.00" chisels hope they don't break or bend..........lol!!!!!!

 

[valin]

T-nuts are a pain in the ***. Push throughs are stronger, easier on your track, and easy to change if there are issues.

Go longer than 1", then you can get away with running less, and you'll be faster.

 

[needaSRX]

I can buy 192 T-nut 1" chisels from a guy I know for $75 and brand new 192 1.2 push throughs Ice chisels sell for 1.99 a piece and that comes out to $382 and backers +$100 more not including taxes. I just don't have the money right and the 1" sounds like a good deal for me right now If I lose I lose...........LOL plus isn't 192 chisels still a little lite for the SRX when setup with heelclickers on ICE or overkill

 

[YAMMIEGOD3:16]

T-NUTS ARE ANOTHER THING THATS FROM THE PAST. 3:16 (yammie tony)

 

[edgeracer1]

192 is a perfect setup if you ask me.

 

[livewire_101proof]

192 is a good setup in my mind, especially if they are a hair long and got alot of penetration. the pattern i use is the christmas tree patern (96 in the center) and they are staggered slightly throughout the outside edges, its hard on tracks especially if u ride aggresive trail but that outside edge is where you get all the bite for holeshots.