94 vmax after putting some work into it!

[n8sjh]

I have had this 94 v-max 600 for a few years now. I took it out for the first time this year after putting some money into it. I put on Plastic skis. Also extended the rails out to 136 and put a 1.5 tall lug track on it. Swapped down to a 8 tooth driver. I swapped the motor out with my wifes old sled motor with way less miles on it and a comet 108 exp clutch. Sled has a Arctic cat secondary and custom jack shaft. Took off the stock bars and got some straighter ones from RSi along with a riser that is 2 inches over the stock height. Also because no one had a tunnel extension I made my own. Just need to get a new tail light for when I have a bag or gas can on the back.

First impression is this thing rips harder than before. Seems to engage a little sooner but will lift the skis just a bit off the ground. Kind of a point and shoot. It does seem to push in the corners and is sometimes hard to turn but may get some other carbides for the skis.

Pictures

 

[Sledsquatch]

I have an easy steer kit for this machine, let me know if you are intersted in it. Nice M-10, how much did the extensions cost you? I want to stretch my M-10mout to a 144".

 

[sbsho]

im doing basically the same thing to my sled but with a 1.25 ripsaw studded. are you haveing any issues with not having the cooler moved backed atg all? if not, im not going to bother moving mine. thanks

 

[n8sjh]

Please pm me more about this easy steer kit you have. As for the extensions I got them from tracks usa and had to do a little messing to get a nice fit but overall a good buy. They have them listed on there site. I think it was around 150?
As for the cooler I opted for the rear cooler off a ST model that is flat with no bend in it and mounts in the same spot. So far no problems.