msrx700 need 136'' to 144''

[MSRX700]

have msrx mountain 1998 with 136''

I need advice to go with the 144'' x 2''

have 9 tooth sprocket ...need 8?

rail extension?

I dont sure if I understand well mountain performancce kit or hartmaninc kit

tanks

 

[BBlueSRX]

yes you need 8T drivers for 2" track. also need rail extensions and a larger tunnel extension.

 

[MSRX700]

this kit is good or not....http://www.mountainperformance.com/kit1.htm

I am little afraid by Suspension Relocation

 

[suva57]

I did suspension relocation on my MM700 today, it was intimidating at first but it went pretty easy.

 

[MSRX700]

I did suspension relocation on my MM700 today, it was intimidating at first but it went pretty easy.

it's looking good for two rear shock or is hard on it?

 

[suva57]

As far as I know it won't hurt the shocks. If anything I think it would be easier on them.

 

[MSRX700]

As far as I know it won't hurt the shocks. If anything I think it would be easier on them.

which kit you use?

 

[suva57]

I didn't use a kit, I work at a fab shop so I was able to build my own parts. It turned out a lot like the MPI kit.

 

[MSRX700]

ok I look for buy mpi kit I wish is good choice

 

[snowdad4]

ok I look for buy mpi kit I wish is good choice

dont waste your time with mpi, they arent handling much for the 2 stroke sleds anymore. try hartmaninc.

 

[YooperMike]

Second on the Harman Inc. Tom Hartman will set you up right!

 

[Coles_55]

If your interested I have an extra set of 8T drivers....

 

[maxdlx]

I have rail ext for 136 to 144 they are new, I nstalled them to find out they were the wrong ones, and removed them. $70 plus shipping

 

[srxhair]

try finding a used 144 doo suspension i put in a 151 doo skid that was the same tunnel width and 20 pounds lighter than my srx 121 skid