donkeypunch
New member
Replacing pistons and rings on an 01 SRX. What are the tq specs for thr cylinders & the heads?
Use loctite?
Use loctite?
kirk700 srx
Member
Do you want a manual?Send me your Email
kirk700 srx
Member
No locktite 9.4 f/lb first then 20 f/lb for heads 24 f/lb for cylinders
Last edited:
bluemonster1
LIFE MEMBER ONLY ONCE!!!
tighten in a sequence only...don't forget..
kirk700 srx
Member
Hey Doug why aren't you out putting those heads on the srx? Leave the important things up to the experts lol
bluemonster1
LIFE MEMBER ONLY ONCE!!!
yeah I know,maybe tonight I will put the exhaust headers and pipes back on and slowly install the heads.It is going to get really cold for the rest of the week..kinda cool for riding in the -38 C range windchills only.
kirk700 srx
Member
Its goin down to -30 tonight here, without the wind, but I dont take the wind into consideration cause -30 with 100 Mph+ winds is COLD! Gotta love those YAMMI'S. Why are we always stealin peoples threads?? LOL
bluemonster1
LIFE MEMBER ONLY ONCE!!!
because we can..lol
donkeypunch
New member
I snugged by hand criss cross then torqued criss cross. That cool?
kirk700 srx
Member
READ CAREFULLYkirk700 srx said:
donkeypunch
New member
No no no lol i snugged by finger then 9.4ftpd in a criss cross manner. I should have been clearer. I was asking if criss crosd was a good sequence as soneone mentioned tightening in sequence but didnt define the meaning...