01 SRX cylinder and head torque specs

[donkeypunch]

Replacing pistons and rings on an 01 SRX. What are the tq specs for thr cylinders & the heads?

Use loctite?

 

[kirk700 srx]

Do you want a manual?Send me your Email

 

[kirk700 srx]

No locktite 9.4 f/lb first then 20 f/lb for heads 24 f/lb for cylinders

 

[bluemonster1]

tighten in a sequence only...don't forget..

 

[kirk700 srx]

Hey Doug why aren't you out putting those heads on the srx? Leave the important things up to the experts lol

 

[bluemonster1]

yeah I know,maybe tonight I will put the exhaust headers and pipes back on and slowly install the heads.It is going to get really cold for the rest of the week..kinda cool for riding in the -38 C range windchills only.

 

[kirk700 srx]

Its goin down to -30 tonight here, without the wind, but I dont take the wind into consideration cause -30 with 100 Mph+ winds is COLD! Gotta love those YAMMI'S. Why are we always stealin peoples threads?? LOL

 

[bluemonster1]

because we can..lol

 

[donkeypunch]

I snugged by hand criss cross then torqued criss cross. That cool?

 

[kirk700 srx]

No locktite 9.4 f/lb first then 20 f/lb for heads 24 f/lb for cylinders

READ CAREFULLY

 

[donkeypunch]

No no no lol i snugged by finger then 9.4ftpd in a criss cross manner. I should have been clearer. I was asking if criss crosd was a good sequence as soneone mentioned tightening in sequence but didnt define the meaning...