Hey i was just wondering what gears guys are using in a 2000ft radar and what mph are you getting? hears the gears I have 22,23,24 on top and 38 and 40 in the bottom. I keep changing but I'm still not 100% sure of what gears I should be working with for the radars. any info would be great.
2000ft radar gearing?
- Thread starter Bullit01
- Start date
tofastSRX
New member
your stock 23/38 so i would use the 22 on top and leave the 38 on the bottom
vmax-sx
New member
If it is a stocker the the factory 23-38 is probably fine . I beleive that is about 113 at 1:1 . A little overdrive and your right there.
YAMMIEGOD3:16
Active member
23-38. 3:16 (yammie tony)
YAMMIEGOD3:16
Active member
WHY NOT. 3:16 (yammie tony)
has any one tryed going 24-38 gearing if yes did it work? Was the sled able to pull it? These are the other clutch parts I have. Weights I have 8dn-20
8bu-00 and 8bu-10. In helix's I have 53-47, 51-43,straight 47, straight 45,
51-40 and a 47-38 I think. So what do you guys think?
8bu-00 and 8bu-10. In helix's I have 53-47, 51-43,straight 47, straight 45,
51-40 and a 47-38 I think. So what do you guys think?
YAMMIEGOD3:16
Active member
8BU-10 WITH THAT 47-38 HELIX. AND 23-38 GEARING. PUT THE REST OF THAT STUFF AWAY. 3:16 (yammie tony)
valin
Active member
By the way, good luck tomorrow, Stan.
PNPerformance
New member
Hey what are pulling for speed now.?Are you liking that 51-43.
YAMMIEGOD3:16
Active member
START OUT AT AROUND 54 GRAMS. 3:16 (yammie tony)Bullit01 said: